|
Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl Saturday Night Racer >> RACE TECH >> rear end width http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1332569052 Message started by ministocker56 on 03/23/12 at 11:04pm |
|
Title: rear end width Post by ministocker56 on 03/23/12 at 11:04pm was woundering if it's a good thing or bad thing if a rear end was wider |
|
Title: Re: rear end width Post by formercrewguy on 03/25/12 at 5:37pm It depends..............some guys like em wide.........you know.....a little cushion for the pushin..... Hope this helps,Greg. |
|
Title: Re: rear end width Post by ministocker56 on 03/25/12 at 10:36pm Hmm well it's like 1 inch wider on each side then the 1 i had before , My ? is what will it do , & thank's |
|
Title: Re: rear end width Post by formercrewguy on 03/26/12 at 9:31pm I would suggest a diet, or have her go up 1 pants size. But that's entirely up to you. |
|
Title: Re: rear end width Post by DaveBauerSS6 on 03/26/12 at 11:16pm With nothing else changed; centering the rear in the car, will loosen the car up in all three parts of the corner. Only on the tacky track will this feel good. Its the wrong way to go. Get another rear end. If you have to use it, mount it to the drivers side and in the heats mount up a 4 offset wheel on the LR. If the Rear cant be mounted to the left because of the driveshaft to tunnel clearance, center mount the rear and run a 2 offset wheel on the RF. Good luck, been there, done that... |
|
Title: Re: rear end width Post by ministocker56 on 03/26/12 at 11:56pm Thank's guy's , Ya ya nice fornercrewguy |
|
Title: Re: rear end width Post by woodracin13 on 03/27/12 at 12:36pm DaveBauerSC6 wrote on 03/26/12 at 11:16pm:
Yep, been there done that. I had to run a 4 offset LR and ran a spacer on RF to match the RR. I also still ran a spacer on the LF to make it as wide as the LR. Pain but hey it worked and I won my first race in that car.. LOL Good luck. Better off getting one the right size... :D |
|
Title: Re: rear end width Post by ministocker56 on 03/27/12 at 6:49pm Well i measured it with the rim's on the rear end & there just about even with the front , It came out to be like 3/8 inch wider then the front on each side |
|
Title: Re: rear end width Post by DaveBauerSS6 on 03/27/12 at 10:05pm you can live with that. |
|
Saturday Night Racer » Powered by YaBB 2.2.3! YaBB © 2000-2008. All Rights Reserved. |