Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> axel tubes
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1321899638

Message started by old dirt racer on 11/21/11 at 10:20am

Title: axel tubes
Post by old dirt racer on 11/21/11 at 10:20am

anyone in central valley install new axel tubes , had one ripped out need new tube and install correct ,, any help

Title: Re: axel tubes
Post by sj_valley_dave on 11/21/11 at 10:52am

What type of rearend?

Title: Re: axel tubes
Post by old dirt racer on 11/21/11 at 1:16pm

9inch gn floater

Title: Re: axel tubes
Post by CaliforniaPickle14B on 11/21/11 at 2:02pm

old dirt racer wrote on 11/21/11 at 1:16pm:

9inch gn floater

did you buy new tubes? i thought you was going to weld it yourself?

Title: Re: axel tubes
Post by old dirt racer on 11/21/11 at 2:43pm

looking for some one with jig for true straight

Title: Re: axel tubes
Post by ninjaforce2 on 11/21/11 at 3:33pm

Bennett motorsports does rearends, they are good!

Title: Re: axel tubes
Post by Missle Motorsports on 11/21/11 at 4:04pm

Stone Motorsports in Winton has the Jig, & does Axle Tube Installs.

Title: Re: axel tubes
Post by flynmike on 11/21/11 at 6:37pm

yes i do have a jig for true straight and i install tubes straighten and narrow rear ends. 661-345-4171 ask for mike

Title: Re: axel tubes
Post by JC12 on 12/03/11 at 10:07am

I straighten axle housing and tubes as well as replace them or make you a new housing, I have a strong jig I made for keeping them straight when welding. I do about 100 or more in a year, I also do them for the Hogges when needed,, So if I can help drop me aline,
Joe Carr
707-481-7416