Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> SATURDAY NIGHT RACER >> American Stock Trolls
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1273562622

Message started by DaveBauerSS6 on 05/11/10 at 12:23am

Title: American Stock Trolls
Post by DaveBauerSS6 on 05/11/10 at 12:23am

Hopefully I can clarify a few things.
First, if you spent a few minutes with the milk guys your attitude would change. The boys are good kids and are working hard on the cars. Rich, Tim and Scott are fun to be with and are there to have fun. I'll remind you that they have a reputation for clean, respectful driving. Eric is just getting started with a motor that will stay together now and we'll see him with some wins this season. Seven cars working together will get better than average results. Its simple math.

I built all but one ( recammed it) of the motors and if I do my job right, there is no need for drivers to touch the motors. I accept the compliment from the other thread; I don't have failures very often.

The dq's last Sat were my fault, I should have caught both problems. None of the others in the group could have known, as I was the only one in these motors. I am checking all the motors and if any changes are needed , they will be done before the next race.

The feedback from the guys is they are no more than 3/4 throttle at the fastest part of the nite. The tacky nites are about behind us and the dry/slick is coming. If you think they are fast now, you are going to be more impressed soon.

Dave Bauer

Title: Re: American Stock Trolls
Post by Watchin15B on 05/11/10 at 3:45pm

I think it is commendable that you would get on here and take responsibility for the dqs and im sure you will make them right!!

Title: Re: American Stock Trolls
Post by TIM_BEWLEY on 05/11/10 at 5:19pm

so you putting a hobby cam in the one that has to move up?

Title: Re: American Stock Trolls
Post by childressJr.16 on 05/11/10 at 5:20pm

18. Any car and driver found with illegal cam shaft, heads, carburetor or locked rear end will be moved to Hobby Stock Division immediately for the rest of the 2006 season. This is a non-touch engine and rear end division. Any alteration from stock will be considered a disqualification, and will be moved out of the division immediately.

THIS IS A MAJOR GREY AREA HERE SEE were it says 2006 that was 4 yrs ago RULES CHANGED since then!!

Title: Re: American Stock Trolls
Post by Chad11 on 05/11/10 at 6:05pm

DaveBauerSC6 wrote on 05/11/10 at 12:23am:

I am checking all the motors and if any changes are needed , they will be done before the next race.

Dave Bauer

Whew, I'm sure that makes everyone feel better. No need to tech now Jimmy...Dave is gonna check it out.

I'm sure the milk kids are good people. I have an issue with you, Perrin and the guy crying in Victorville. You guys should have known better.

Title: Re: American Stock Trolls
Post by TIM_BEWLEY on 05/11/10 at 9:28pm

Chad11 wrote on 05/11/10 at 6:05pm:

DaveBauerSC6 wrote on 05/11/10 at 12:23am:

I am checking all the motors and if any changes are needed , they will be done before the next race.

Dave Bauer

LOL

Title: Re: American Stock Trolls
Post by Perrin on 05/12/10 at 9:09am

Chad it seems you have a lot of issues!

Title: Re: American Stock Trolls
Post by lmfan01 on 05/13/10 at 12:24am

Key word is "ALOT"

Title: Re: American Stock Trolls
Post by Watchin15B on 05/13/10 at 12:28am

2Xhobby wrote on 05/13/10 at 12:24am:

Key word is "ALOT"

Jimmy i believe thats actually two words!! :D

Title: Re: American Stock Trolls
Post by lmfan01 on 05/13/10 at 12:31am

lol Whatever !!!!! You get my point